H–16 / TP–16
- For truck chassis of the total weight of 5,000 kg or more (single cabin 1 + 1, dual rear wheels), wheelbase 3,750 mm, driving Vehicle category C
- For truck chassis of the total weight of 5,000 kg or more (double cabin 1 + 6, dual rear wheels), wheelbase 4,100 mm, driving Vehicle category C
- Axles truck chassis 2
- Type of hydraulic platforms - articulated working platform
- Working platform height 17.0 m
- Maximum lateral outreach 7.8 m
- Drive hydraulic platform with power outputs from gearbox vehicles
- Managing electro hydraulic platform from the basket and from the ground, extra manual operation
- Insurance limit position doubled
- The width of the platform drivable 2,000 mm
- Platform height drivable 2.540 mm
- Platform length drivable 6.650 mm
- Maximum weight 2.200 kg
- The minimum height of the working basket from the floor drivable 700 mm
- The minimum height of the stabilizer from the floor drivable 300 mm
- Stabilizers 4 pieces, with the possibility of a single hydraulic control
- The range of stabilizers in the working position maximum 2,500 mm
- Working outreach behind the air barrier 4 m
- The maximum angle of elevation of the third lever (carrier lifts) 180 degrees
- Working baskets made of polyester load capacity 200 kg
- Turning dome infinit (except when it comes to water pipes or electric tool out of the basket)
- Isolation platform to 1,000 V (except when it comes to water pipes or electric tool out of the basket)
- The degree of protection IP 65 electrical equipment
- Safety standards according to CE standards
- Sandblasting and painting twice the subframe in truck color _ platform orange RAL 2011
- Sidebar underrun protection according to CE standards
- Mudguards on the rear wheels
- Electrical
- Outline lights
- SAFETY AT WORK Certificate for cranes
- Certificate from the Center for vehicles of Republic Croatia
Accessories
- Water: Stable pipeline for water NO50 (2 "), the maximum pressure p = 4 bar rotating part, from the the rotary dome to the work basket, quick disconnect fittings and pressure regulator
- Electricity: Electrical cable with the required number of outlets 220 V from the dome to the working basket to operate with compressors from the working baskets
- increased site: elevated sites at the floor of the platform height of about of 200 mm (660.00 EUR)
- toolbox: a special tool box, measuring 800 × 800 × width platform, aluminum sheet, the door to the left and right side
- protection from smoke: Stable pipeline for water NO50 (2 "), the maximum pressure p = 4 bar rotating part , from the the rotary dome to the work basket, quick disconnect fittings and pressure regulator + water spray under the work cage to protect against smoke