Three-sided tippers
Tipper type KS 250 N4
For truck chassis from 33.001 – 41.000 kg
Technical data:
KS 250 N4 | | 5.800 mm | 6.200 mm | 6.400 mm |
body length |
mm |
5.800 |
6.200 |
6.400 |
weidth |
mm |
2.300 |
2.300 |
2.300 |
height side board/rear board |
mm |
1.100 |
1.100 |
1.100 |
volume |
m³ |
≈ 14,8 |
≈ 15,7 |
≈ 16,2 |
weight |
kg |
≈ 4.800 |
≈ 4.950 |
≈ 5.150 |
Standard equipment:
- for truck chassis equipped with a PTO
- number of axles: 4
- type: three sided tipper
- technical load capacity: cca. 27.000 kg
- height of the front wall: 1.200 mm
- the material of the front wall and the thickness: St 52 / 4 mm
- the material of the side / rear board and the thickness: St 52 / 4 mm
- side boards: dual/doubled
- the opening of the side boards: deflection
- the opening of the back board: deflection (automatic)
- floor material and the thickness: HARDOX 400 / 6 mm
- the system raising of the tipper: centrally located telescopic hydraulic cylinder
- complete hydraulics
- drive hydraulic pumps over power outputs from vehicles (PTO)
- control - tipping load: valve (joystick) in the cabin located laterally to the driver's seat
- steel parts are sandblasted and painted twice
- subframe painted in the color of the vehicle
- tipper body painted in monochrome color of the vehicle cab or customer specification
- side underrun protection according to CE standards
- mudguards on the rear wheels
- electrical installations
- outline marker lights
- atest from the Center for vehicles Republic of Croatia
Additional equipment at extra charge:
- excerpt from the transmission from the truck chassis, with installation, depending on the type of truck chassis and transmission
- installation of hydraulics for tipper trailer
- toolbox with carriers
- material / floor thickness:HARDOX 400 – 10 mm
- doubled opening of the double side walls, deflection / flap
- demountable middle pillars, on the doubled side walls
- steel side walls height 1.200 mm / front wall 1.300 mm
- aluminum side and rear walls height 1.100 mm, profile 75 / 60 / front steel wall height 1.200 mm
- aluminum side and rear walls height 1.200 mm, profile 75 / 60 / front steel wall height 1.300 mm
- Bordmatic, hydraulic board opening on one side of the single one-pieced side boards, for board height 1.100 mm
- installation of hydraulics for tipper trailer with Bordmatic
- spare wheel carrier
- spare wheel carrier, lying under the subframe of the tipper
- extension for unloading asphalt 300 mm (demountable)
- tarpaulin cover for asphalt, with no mechanism (heat resistant)
- tarpaulin cover with mechanism (normal)
- folding rear underrun protection, especially for truck chassis intended for loading asphalt in the finisher