Three-sided tippers
Tipper type KS 200 N3
For truck chassis from 30.000 – 33.000 kg
Technical data:
| KS 200 N3 | | 5.000 mm | 5.200 mm |
|---|
| body length |
mm |
5.000 |
5.200 |
| weidth |
mm |
2.300 |
2.300 |
| height side board/rear board |
mm |
1.100 |
1.100 |
| volume |
m³ |
12,7 |
≈ 13,1 |
| weight |
kg |
≈ 3.550 |
≈ 3.690 |
Standard equipment:
- for truck chassis equipped with a PTO
- number of axles: 3
- type: three sided tipper
- technical load capacity: cca. 21.000 kg
- height of the front wall: 1.200 mm
- the material of the front wall and the thickness: St 52 / 4 mm
- the material of the side / rear board and the thickness: St 52 / 4 mm
- side boards: dual/doubled
- the opening of the side boards: deflection
- the opening of the back board: deflection (automatic)
- floor material and the thickness: HARDOX 400 / 6 mm
- the system raising of the tipper: centrally located telescopic hydraulic cylinder
- complete hydraulics
- drive hydraulic pumps over power outputs from vehicles (PTO)
- control - tipping load: valve (joystick) in the cabin located laterally to the driver's seat
- steel parts are sandblasted and painted twice
- subframe painted in the color of the vehicle
- tipper body painted in monochrome color of the vehicle cab or customer specification
- side underrun protection according to CE standards
- mudguards on the rear wheels
- electrical installations
- outline marker lights
- atest from the Center for vehicles Republic of Croatia
Additional equipment at extra charge:
- excerpt from the transmission from the truck chassis, with installation, depending on the type of truck chassis and transmission
- installation of hydraulics for tipper trailer
- toolbox with carriers
- material / floor thickness: HARDOX 400 – 8 mm
- double opening of the rear wall, deflection/ flap(manual)
- double opening of the double side walls, deflection/ flap removable middle poles, by the doubled side walls
- steel side walls height 1.200 mm / pfront wall 1.300 mm
- aluminum side and rear walls height 1.100 mm, profil 75 / 60 / front steel wall height 1.200 mm
- aluminum side and rear walls height 1.200 mm, profil 75 / 60 / front steel wall height 1.300 mm
- Bordmatic, hydraulic board opening on one side of the single one-pieced side boards, for board height 1.100 mm
- installation of hydraulics for tipper trailer with Bordmatic
- spare wheel carrier
- spare wheel carrier, lying under the subframe of the tipper
- extension for unloading asphalt 300 mm (demontable)
- tarpaulin cover for asphalt, with no mechanism (heat resistant)
- tarpaulin cover with mechanism (normal)
- folding rear underrun protection, especially for truck chassis intended for loading asphalt in the finisher
