Three-sided tippers
Tipper type KS 20
For truck chassis from 3.501 – 6.500 kg
Technical data:
| KS 20 | | 2.800 mm | 3.000 mm | 3.300 mm | 3.600 mm | 4.000 mm |
|---|
| body length |
mm |
2.800 |
3.000 |
3.300 |
3.600 |
4.000 |
| weidth |
mm |
2.100 |
2.100 |
2.100 |
2.100 |
2.100 |
| height side board / rear board |
mm |
400 |
400 |
400 |
400 |
400 |
| volume |
m³ |
2,3 |
≈ 2,5 |
≈ 2,7 |
≈ 3 |
≈ 3,3 |
| weight |
kg |
≈ 630 |
≈ 670 |
≈ 710 |
≈ 750 |
≈ 850 |
Standard equipment:
- for truck chassis equipped with a PTO
- number of axles: 2
- type: three sided tipper
- technical load capacity: cca. 4.100 kg
- height of the front wall: 450 mm
- the material of the front wall and the thickness: St 52/2 mm
- the material of the side / rear board and the thickness: St 52/2 mm
- side board: singled one piece
- the opening of the side boards: flap
- the opening of the back board: flap
- floor material and the thickness: HARDOX 400 / 2.5 mm (St 52)
- the system raising of the tipper: centrally located telescopic hydraulic cylinder
- complete hydraulics
- drive hydraulic pumps over power outputs from vehicles (PTO)
- control - tipping load: valve (joystick) in the cabin located laterally to the driver's seat
- steel parts are sandblasted and painted twice
- subframe painted in the color of the vehicle
- tipper body painted in monochrome color of the vehicle cab or customer specification
- side underrun protection according to CE standards
- mudguards on the rear wheels
- electrical installations
- outline marker lights
- atest from the Center for vehicles Republic of Croatia
Additional equipment at extra charge
- excerpt from the transmission from the truck chassis, with installation, depending on the type of truck chassis and transmission
- toolbox with carriers
- pelevated front wall (600 mm) with mesh protection of the cabin
- elevated side walls (removable, mesh + 400 mm)
- aluminum side and back boards
- spare wheel carrier
