Special garbage trucks
Special garbage trucks type sm13, SM16, SM17, SM18 different volume and payload are designed according to the experience of users, and the applicable technical standards, including ECE standards. The purpose of collecting and transporting garbage to landfills. It consists of the following main assemblies: garbage container, pressure plate, lifting doors, vending machines for emptying bins and containers.
Drive: hydraulic with power outputs from gearbox of the vehicle.
The system of unloading: with a push plate.
Working cycle: continuous, automatic, single cycle, single cycle sincronized hoisting and tilting containers, manual.
Devices for the deterioration are performed from 120-1100 l. Working pressure in the system is 190 bar. Compression Ratio 5.5: 1st
The main safety devices are:
- a device that prevents the inclusion of the output shaft PTO if the clutch pedal is not depressed,
- a device that turns off the output shaft by pressing on the clutch pedal,
- switch for emergency stop,
- protection on the device for the deterioration containers,
- valves for balancing the cylinders of the lifting door
- stairs for surveillance,
- remote control for the hatch and push plate.
Upgradeable to vehicles with a permissible mass of 14-19 t.
|The payload of the container||m³||≈ 13,4||≈ 15.5||≈ 16,4||≈ 17,5|
|Useful volume of the load opening within AU15||m³||1,5||1,5||1,5||1,5|
|Length of the container||mm||≈ 4.100||≈ 4.600||≈ 4.900||≈ 5.100|
|Weight of the body with the device for the deterioration container||kg||≈ 4.500||≈ 4.700||≈ 4.800||≈ 5.000|
|The maximum load capacity of the body||kg||7.400||9.300||10.000||10.400|
|Garbage loading speed||m³/min||4,5||4,5||4,5||4,5|
|Time of complete cycle loading||s||24||24||24||24|
|Time for unloading the full tank||s||42||48||48||48|
Year of production: 2014.Read more